Order and Maintain Your Custom THEdour Space-Saving Doors

ROLdoûr screen is made from 100% polyester with a blush textured finish on the front suitable for a luxurious living space with a waterproof PVC coating on the back.

We recommend when purchasing one of our ROLdoûr retractable shower screen doors through our website and guidance videos to treat your fabric screen with a fabric protection before use and seasonal treatment / Top up as and when required, this will help to protect the textured fabric side against scuffs, marks of stains created by passing traffic in the living area which can then be easily wiped clean.

We recommend waterproof fabric protection products such as a dry fabric waterproof shield from brand scotchgard for the textured side.

The waterproof side -

It is also possible to add extra protection to this side with a waterproof repellent spray to help support a quicker water run off, with the position of your shower head, you may feel you might need to add an extra shield to protect your screen if the shower head is in the direct line off sight of the water spray as apposed to general off spray from a side positioned shower head.

ROLdoûr screen is made from 100% polyester with a smooth waterproof PVC coating

To clean the textured polyester side -

First remove any surface dust with a dry cloth before

Use a damp cloth (not soaking wet) or even baby wipes to wipe or dab at any marks or stains, using a gently scrubbing motion if needed for tougher stains rinsing your cloth regularly to ensure you’re not just moving the dirt around.
You can remove the cartridge from the frame and clean on a flat clean surface, you can clean the screen when in situ do not use force as this can stretch the screen and the waterproof resin, place a clean flat object / board behind whilst cleaning the area from the opposite side.
Wipe the fabric in one direction from top to bottom with the screen fully extended.
Leave the screen fully extended to air dry naturally.
Do not use bleach or any other harsh or abrasive chemicals, as this is apt to discolour or ruin the fabric itself. Stick to water that is warm rather than hot for all of these same reasons.
Once fully dry & clean re treat with fabric protection spray to protect against scuffs or marks created by passing traffic in the living area.

To clean the waterproof side -

You can remove the cartridge from the frame and clean on a flat clean surface, you can clean the screen when in situ do not use force as this can stretch the screen and the waterproof resin, place a clean flat object / board behind whilst cleaning the area from the opposite side.

Use a wet soapy soft cloth or sponge to clean, using a gently scrubbing motion and rinsing away soap with fresh clean water.
Avoid using bleach or any other harsh or abrasive chemicals, as this is apt to discolour or ruin the fabric itself or remove the protective waterproof layer. Stick to water that is warm rather than hot for all of these same reasons use a light soapy cleaning product.
Once fully dry & clean re treat with water proof shield spray to protect if required.

With the correct protection and cleaning your waterproof space-saving door will last for many years to come, It is also possible to reorder a replacement cartridge with new fabric & as we grow as a company so will our range of colours to allow you to update your door by completely changing the colour of your screen.

Support videos for ROLdoûr

Order and Maintain Your Custom THEdour Space-Saving Doors

How to Clean & Protect ROLdoûr Screen

Votre panier

Important Information Links

Important Information